info@mtbetaminerals.co.za | 083 232 0083
Navigation

Acetone 99% (Extra Pure)

Posted by on July 8, 2014 in Uncategorized | Comments Off

Material Safety Data Sheet

 

ACETONE 99% EP

 

Section 1

Chemical Product and Company Identification

 

Product Name: ACETONE 99% EP

 

Synonyms: Dimethylketone; 2-propanone; dimethylketal

CAS No.: 67-64-1

Molecular Weight: 58.08 g/mol

Chemical Formula: (CH3)2CO

 

Company Identification:                  

MT Beta Minerals (PTY) LTD                  

H1 Tillbury Business Park

1030 Sixteenth Road, Midrand                  

1682, South Africa

For information – call: 083 232 0083

Emergency Number: 083 232 0083

 

 

Section 2

Composition, Information on Ingredients

 

CAS #

Chemical Name

Percent

EINECS/ELINCS

67-64-1

Acetone

99 -100



 

 

 

 

 

 

Section 3

Hazardous Identification

 

EMERGENCY OVERIEW

 

DANGER! EXTREMELY FLAMMABLE LIQUID AND VAPOR. VAPOR MAY CAUSE FLASH FIRE. HARMFUL IF SWALLOWED OR INHALED. CAUSES IRRITATION TO SKIN, EYES AND RESPIRATORY TRACT. AFFECTS CENTRAL NERVOUS SYSTEM.

 

 

Safety data

Rating

Health Rating

2 – Moderate

Flammability Rating

3 – Severe (Flammable)

Reactivity Rating

0 – None

Contact Rating

3 – Severe

Lab Protective Equip

Goggles & Shield; Laboratory Coat / Apron; Extraction/

Vent Hood; Appropriate Gloves; Class B Extinguisher

Storage Color Code

Red (Flammable)

 

 

Potential Health Effects

 

Inhalation: Inhalation of vapors irritates the respiratory tract. May cause coughing, dizziness, dullness, and headache. Higher concentrations can produce central nervous system depression, narcosis, and unconsciousness.

 

Ingestion: Swallowing small amounts is not likely to produce harmful effects. Ingestion of larger amounts may produce abdominal pain, nausea and vomiting. Aspiration into lungs can produce severe lung damage and is a medical emergency. Other symptoms are expected to parallel inhalation.

 

Skin Contact: Irritating due to defatting action on skin. Causes redness, pain, drying and cracking of the skin.

 

Eye Contact: Vapors are irritating to the eyes. Splashes may cause severe irritation, with stinging, tearing, redness and pain.

 

Chronic Exposure: Prolonged or repeated skin contact may produce severe irritation or dermatitis.

 

Aggravation of Pre-existing Conditions: Use of alcoholic beverages enhances toxic effects. Exposure may increase the toxic potential of chlorinated hydrocarbons, such as chloroform, tri-chloroethane.

 

 

 

Section 4

First Aid Measures

 

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

 

Ingestion: Aspiration hazard. If swallowed, vomiting may occur spontaneously, but DO NOT INDUCE. If vomiting occurs, keep head below hips to prevent aspiration into lungs. Never give anything by mouth to an unconscious person. Call a physician immediately.

 

Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

 

Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, lifting upper and lower eyelids occasionally. Get medical attention.

 

 

Section 5

Fire Fighting Measures

 

Fire: Flash point: -20oC; Auto-ignition temperature: 465oC; Flammable limits in air % by volume: (lel: 2.5; uel: 12.8); Extremely Flammable Liquid and Vapor! Vapor may cause flash fire.

 

Explosion: Above flash point, vapor-air mixtures are explosive within flammable limits noted above. Vapors can flow along surfaces to distant ignition source and flash back. Contact with strong oxidizers may cause fire. Sealed containers may rupture when heated. This material may produce a floating fire hazard. Sensitive to static discharge.

 

Fire Extinguishing Media: Dry chemical, alcohol foam or carbon dioxide. Water may be ineffective. Water spray may be used to keep fire exposed containers cool, dilute spills to nonflammable mixtures, protect personnel attempting to stop leak and disperse vapors.

 

Special Information: In the event of a fire, wear full protective clothing and NIOSH-approved self-contained breathing apparatus with full face-piece operated in the pressure demand or other positive pressure mode.

 

 

Section 6

Accidental Release Measures

 

 

Ventilate area of leak or spill. Remove all sources of ignition. Wear appropriate personal protective equipment as specified in Section 8. Isolate hazard area. Keep unnecessary and unprotected personnel from entering.

 

Use water spray to dilute spill to a nonflammable mixture. Contain and recover liquid when possible. Collect liquid in an appropriate container or absorb with an inert material (e. g., vermiculite, dry sand, earth), and place in a chemical waste container. Use non-sparking tools and equipment. Do not use combustible materials, such as saw dust. Do not flush to sewer! South African Regulations require reporting spills and releases to soil, water and air in excess of reportable quantities.

 

 

Section 7

Handling and Storage

 

Protect against physical damage. Store in a cool, dry well-ventilated location, away from any area where the fire hazard may be acute. Outside or detached storage is preferred. Separate from incompatibles. Containers should be bonded and grounded for transfers to avoid static sparks. Storage and use areas should be No Smoking areas. Use non-sparking type tools and equipment, including explosion proof ventilation. Containers of this material may be hazardous when empty since they retain product residues (vapors, liquid); observe all warnings and precautions listed for the product.

 

 

Section 8

Exposure Controls, Personal Protection

 

Exposure Limit

 

Airborne Exposure

Limit

OSHA Permissible Exposure Limit (PEL)

1000 ppm (TWA)

ACGIH Threshold Limit Value (TLV)

500 ppm (TWA), 750 ppm (STEL) A4 – not classifiable as a human carcinogen

 

 

Ventilation System: A system of local and/or general exhaust is recommended to keep employee exposures below the Airborne Exposure Limits. Local exhaust ventilation is generally preferred because it can control the emissions of the contaminant at its source, preventing dispersion of it into the general work area. Please refer to the ACGIH document, Industrial Ventilation, A Manual of Recommended Practices, most recent edition, for details.

 

Personal Respirators (NIOSH Approved): If the exposure limit is exceeded, a full face-piece respirator with organic vapor cartridge may be worn up to 50 times the exposure limit or the maximum use concentration specified by the appropriate regulatory agency or respirator supplier, whichever is lowest. For emergencies or instances where the exposure levels are not known, use a full-face-piece positive-pressure, air-supplied respirator. WARNING: Air purifying respirators do not protect workers in oxygen-deficient atmospheres.

 

Skin Protection: Wear impervious protective clothing, including boots, gloves, lab coat, apron or coveralls, as appropriate, to prevent skin contact.

 

Eye Protection: Use chemical safety goggles and/or a full face shield where splashing is possible. Maintain eye wash fountain and quick-drench facilities in work area.

 

 

Section 9

Physical and Chemical Properties

 

Parameter

Properties

Appearance

Clear, colorless, volatile liquid

Odour

Fragrant, mint-like

Solubility

Miscible in all proportions in water

Specific Gravity

0.79 @ 20oC

 

 

Parameter

Properties

pH

Data not available

%Volatiles by volume @ 21oC

100

Boiling Point

56.5oC @ 760 mm Hg

Melting Point

-95oC

Vapor Pressure (Air = 1)

2.0

Evaporation Rate (BuAc=1)

ca. 7.7

 

 

 

Section 10

Stability and Reactivity

 

Stability: Stable under ordinary conditions of use and storage.

 

Hazardous Decomposition Products: Carbon dioxide and carbon monoxide may form when heated to decomposition.

 

Hazardous Polymerization: Data not available.

 

Incompatibilities: Concentrated nitric and sulfuric acid mixtures, oxidizing materials, chloroform, alkalis, chlorine compounds, acids, potassium t-butoxide.

 

Conditions to Avoid: Heat, flames, ignition sources and incompatibles.

 

 

Section 11

Toxicological Information

 

Oral rat LD50: 5800 mg/kg; Inhalation rat LC50: 50,100mg/m3; Irritation eye rabbit, Standard Draize, 20 mg severe; investigated as a tumorigen, mutagen, reproductive effector.

 

 

 

Section 12

Ecological Information

 

Environmental Fate: When released into the soil, this material is expected to readily biodegrade. When released into the soil, this material is expected to leach into round water. When released into the soil, this material is expected to quickly evaporate. When released into water, this material is expected to readily biodegrade. When released to water, this material is expected to quickly evaporate. This material has a log octanol-water partition coefficient of less than 3.0. This material is not expected to significantly bio-accumulate. When released into the air, this material may be moderately degraded by reaction with photo-chemically produced hydroxyl radicals. When released into the air, this material may be moderately degraded by photolysis. When released into the air, this material is expected to be readily removed from the atmosphere by wet deposition.

 

Environmental Toxicity: This material is not expected to be toxic to aquatic life. The LC50/96-hour values for fish are over 100 mg/L.

 

 

Section 13

Disposal Considerations

 

Whatever cannot be saved for recovery or recycling should be handled as hazardous waste and sent to a RCRA approved waste facility. Processing, use or contamination of this product may change the waste management options. State and local disposal regulations may differ from federal disposal regulations. Dispose of container and unused contents in accordance with federal, state and local requirements.

 

 

Section 14

Transport Information

 

Proper Shipping Name: ACETONE

Hazard Class: 3

UN/NA: UN1090

Packing Group: II

Information reported for product/size: 188L

International (Water, I.M.O.)

—————————–

Proper Shipping Name: ACETONE

Hazard Class: 3

UN/NA: UN1090

Packing Group: II

Information reported for product/size: 188L

 

 

Section 15

Regulatory Information

 

This safety datasheet complies with the requirements of Regulation.

 

 

Section 16

Additional Information

 

The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. The information in this document is based on the present state of our knowledge and is applicable to the product with regard to appropriate safety precautions. It does not represent any guarantee of the properties of the product. MT Beta Minerals (Pty) Ltd and its Affiliates shall not be held liable for any damage resulting from handling or from contact with the above product.

 

NFPA Ratings: Health: 1 Flammability: 3 Reactivity: 0

css.php